Computer Numerically Controlled (CNC) Tool Programmers in the San Diego-Chula Vista-Carlsbad, CA area earn an impressive average annual salary of $83,200. This figure significantly surpasses the national average of $69,870, indicating a strong local demand for these specialized skills. The robust compensation reflects the region's industrial needs and the technical expertise required for this role.
Executive Summary
- Average Salary: $83,200 per year.
- Growth Trend: Salaries have shifted 0.0% ↘ over the last 5 years.
- Top Earners: Senior professionals (90th percentile) earn up to $114,680.
- Outlook: With a local workforce of 250 CNC Tool Programmers and a Location Quotient of 0.87, the San Diego-Chula Vista-Carlsbad market shows a healthy, albeit slightly below national average, concentration of these professionals. While not hyper-concentrated, the presence of a dedicated workforce suggests consistent demand and opportunities within the region's manufacturing and technology sectors.
Salary Overview
The average Computer Numerically Controlled Tool Programmers in San Diego-Chula Vista-Carlsbad, CA earns+19.1%above the national average.
$40
$1,600
$6,933
Computer Numerically Controlled Tool Programmers Salary Trends (2020-2024)
While specific historical data is not provided, it is reasonable to assume that salaries for CNC Tool Programmers in San Diego-Chula Vista-Carlsbad have experienced steady growth over the past four years, mirroring national trends. Advancements in manufacturing technology and increased automation likely contribute to a rising demand for skilled programmers, pushing compensation upwards.
Computer Numerically Controlled Tool Programmers Salary Distribution in San Diego-Chula Vista-Carlsbad, CA
Salary progression for CNC Tool Programmers is typically tied to experience and skill specialization. Entry-level positions may start closer to the lower percentiles, while senior programmers with extensive experience in complex programming, machine operation, and quality control can command salaries in the upper percentiles. The widening gap between entry-level and senior roles signifies clear career advancement opportunities.
| Experience Level | Market Percentile | Annual Wage | Hourly Rate |
|---|---|---|---|
| ApprenticeLearning trade under supervision. Classroom + OJT. | 10% (Entry) | $55,650 | $26.8 |
| JourneymanLicensed/Certified. Works independently on standard tasks. | 25% (Junior) | $62,400 | $30 |
| Senior TechnicianHandles complex installations & troubleshooting. | 50% (Median) | $79,770 | $38.4 |
| Foreman / MasterSupervises crews, handles permits & code compliance. | 75% (Senior) | $104,000 | $50 |
| SuperintendentSite management, business owner, or master tradesman. | 90% (Expert) | $114,680 | $55.1 |
Detailed Computer Numerically Controlled Tool Programmers Market Analysis
Relocation Context
Nominal Salary
$83,200
Gross Pay
Real Wage (Purchasing Power)
$83,200
Adjusted for COL (100)
The average annual salary of $83,200 in San Diego-Chula Vista-Carlsbad aligns perfectly with the national average Cost of Living Index of 100. This means that the higher nominal salary translates directly into equivalent purchasing power compared to the national average, making the region financially attractive for CNC Tool Programmers seeking a stable and comfortable lifestyle.
Job Market Context
250
Total Jobs
0.16
Per 1K Jobs
0.87
Location Quotient
San Diego-Chula Vista-Carlsbad, CA has 0.87x the national average concentration of Computer Numerically Controlled Tool Programmers jobs. This means there are fewer opportunities per capita here compared to the U.S. average — competition for roles may be higher.
A Location Quotient of 0.87 suggests that CNC Tool Programmer jobs are slightly less concentrated in San Diego-Chula Vista-Carlsbad compared to the national average. This indicates a balanced job market where demand exists, but the competition might be less intense than in areas with a higher concentration, potentially offering good opportunities for qualified candidates.
Nearby Job Markets
Nearby Cities for Computer Numerically Controlled Tool Programmers
| City | Salary | Dist. |
|---|---|---|
| Riverside-San Bernardino-Ontario, CA Computer Numerically Controlled Tool Programmers Salary | $73,020↓ 12% | 79 mi |
Comparing salaries near San Diego-Chula Vista-Carlsbad, CA
Hiring Computer Numerically Controlled Tool Programmerss?
Frequently Asked Questions
How much does a Computer Numerically Controlled Tool Programmers make in San Diego-Chula Vista-Carlsbad, CA?
The median annual salary for a Computer Numerically Controlled Tool Programmers in San Diego-Chula Vista-Carlsbad, CA is $83,200. This typically ranges from $55,650 for entry-level positions to $114,680 for top-level roles.
How does the salary compare to the national average?
The average salary for this role in San Diego-Chula Vista-Carlsbad, CA is 19.1% higher than the national median of $69,870.
Is San Diego-Chula Vista-Carlsbad, CA a lucrative place for Computer Numerically Controlled Tool Programmers?
Yes, it is a lucrative location.CNC Tool Programmers in this area earn significantly above the national average salary, and the cost of living is on par with the national average, offering excellent financial standing.
Is San Diego-Chula Vista-Carlsbad, CA a good place to live for Computer Numerically Controlled Tool Programmers?
The Cost of Living Index in San Diego-Chula Vista-Carlsbad, CA is 100. While higher than average, this often correlates with higher wages.
Where are the highest paying cities near San Diego-Chula Vista-Carlsbad, CA?
Some top paying nearby cities include Riverside-San Bernardino-Ontario, CA ($73,020) and others.
How does the San Diego CNC Programmer salary compare to the national average?
The average annual salary for CNC Tool Programmers in San Diego-Chula Vista-Carlsbad is $83,200, which is considerably higher than the national average of $69,870.
What is the Cost of Living in San Diego-Chula Vista-Carlsbad, CA?
The Cost of Living Index for San Diego-Chula Vista-Carlsbad is 100, which is exactly the national average, meaning your salary has average purchasing power.
How many CNC Tool Programmers work in the San Diego area?
There are approximately 250 Computer Numerically Controlled Tool Programmers employed in the San Diego-Chula Vista-Carlsbad, CA metropolitan area.
What does a Location Quotient of 0.87 mean for CNC Programmers in San Diego?
A Location Quotient of 0.87 indicates that the concentration of CNC Tool Programmers in this region is slightly below the national average, suggesting a healthy but not overly saturated job market.
Methodology: Salary data is derived from the Bureau of Labor Statistics (BLS) OEWS 2024 release. Figures represent gross pay before taxes. Analysis includes 250 employees in the San Diego-Chula Vista-Carlsbad, CA area with a job density of 0.16 per 1,000 jobs. Cost of Living data is estimated based on state and metro averages.
Explore Computer Numerically Controlled Tool Programmers Salaries by State
Top Jobs in San Diego-Chula Vista-Carlsbad, CA
- All Occupations Salary in San Diego-Chula Vista-Carlsbad, CA
- Office and Administrative Support Occupations Salary in San Diego-Chula Vista-Carlsbad, CA
- Food Preparation and Serving Related Occupations Salary in San Diego-Chula Vista-Carlsbad, CA
- Sales and Related Occupations Salary in San Diego-Chula Vista-Carlsbad, CA
- Management Occupations Salary in San Diego-Chula Vista-Carlsbad, CA
- Business and Financial Operations Occupations Salary in San Diego-Chula Vista-Carlsbad, CA
- Transportation and Material Moving Occupations Salary in San Diego-Chula Vista-Carlsbad, CA
- Healthcare Practitioners and Technical Occupations Salary in San Diego-Chula Vista-Carlsbad, CA
- Educational Instruction and Library Occupations Salary in San Diego-Chula Vista-Carlsbad, CA
- Healthcare Support Occupations Salary in San Diego-Chula Vista-Carlsbad, CA
- Browse All Jobs in San Diego-Chula Vista-Carlsbad, CA →
Semantic Salary Analysis for Computer Numerically Controlled Tool Programmers • Data source: BLS OEWS 2024 •Jobs in San Diego-Chula Vista-Carlsbad, CA